+27 (0) 11 466 2480 | sales [at] multialloys [dot] co [dot] za

Titanium Based Alloys

Titanium and its alloys are useful engineering materials because of their excellent resistance to corrosion in oxidizing environments and / or high strength to weight ratio. They also offer resistance to erosion by flowing solutions with entrained solids and good heat transfer characteristics.

Related Titanium Based Alloys
Product Major Applications Availability
Grade: UNS R53400
Composition:
98.5Ti - 0.3Mo - 0.8Ni (controlled interstitials)

Grade 12 is a highly weldable and fabricable alloy offering improved strength and pressure vessel code allowances compared to Grade 2. It also has corrosion resistance advantages.

Imported; ex-stock or mill availability.

Grade: UNS R52402
Composition:
99.5Ti - 0.05Pd (controlled interstitials)

A lower cost, leaner Pd version of Grade 7 with equivalent mechanical and physical properties and corrosion resistance between that of Grades 7 and 2.

Imported; ex-stock (limited) or mill availability.

Grade: UNS R50400
Composition:
99.5Ti - 0.03N - 0.30Fe - 0.25 O

Moderate strength unalloyed grade of titanium with excellent weldability, cold formability and fabricability; "workhorse" grade for industrial service. It displays excellent resistance to a wide range of conditions ranging from mildly reducing to highly oxidising.

Comprehensive range of plate, bar, pipe and tube from stock;or imports from stock or mill availability.

Grade: UNS R50700
Composition:
99.3Ti - 0.05N - 0.50Fe - 0.40 O

Much stronger version of Grade 2 as a result of the higher level of interstitial elements. It has reasonable weldability but reduced ductility and formability. Widely used for plating and anodising jigs and fixtures.

Imported; ex-stock (limited) or mill availability.

Grade: UNS R56400
Composition:
89.3Ti - 6Al - 4V - 0.05N - 0.40Fe - 0.20

Heat treatable, high strength, most commercially available titanium grade for use up to 400 deg c.- "workhorse" grade for the aerospace industry. Offers excellent combination of strength, toughness and ductility along with good weldability and fabricability. Grade 23 is a variant having extra low interstitial elements and thus improved ductility and fracture toughness.

Imported; ex-stock or mill availability.

Grade: UNS R52400
Composition:
99.3Ti - 0.2Pd - 0.03N - 0.30Fe - 0.25O

The titanium alloy most resistant to corrosion in reducing acids and to localised attack in hot halide media. It has physical and mechanical properties equivalent to Grade 2 and excellent weldability / fabricability.

Imported; ex-stock or mill availability.